POK Quick Stick Technology features the use of a small easy to use solid stick of wetting agent, type A or AFFF/AR. The water passing through the mixing tube dissolves the stick. Eliminates the drawbacks of liquid foams: weight, size, transfer problems. The nozzle offers a flow rate of 100 lpm at the operating pressure of 6 bar. Several inlet connections are possible: threaded BSP or NST-NH or standardised couplings.
Fire Fighting
HAND HELD NOZZLE-EDUPOK
Our self-educting nozzle “EDUPOK” 95 GPM has an ultra-compact mixing system integrated in the grip of the nozzle and does not require an external foam eductor. The nozzle is made out of aluminium alloy hard anodised. The bumper with tactile marks enables to select the different stream patterns (straight jet, flashover, wide angle spray). The operating handle enables a quick open/close of the nozzle
Hand Held Nozzles-TURBOKADOR
The head ring with tactile markings allows to select from several stream patterns (straight jet, flash over and wide angle spray). This family of nozzles comes with three possibilities of tips:
Turbo (with spinning teeth), Debi (teeth cut in aluminum alloy) and Magi (molded rubber teeth).
BELIER PIERCING NOZZLE
The “Belier” nozzle is designed to reach and extinguish fires in closed rooms. It is of particularly robust design in stainless steel construction. Four grip handles allow intervention in pairs. It offers the choice of multiple configurations: short or long extension, shutoff valve, etc. It is equipped with an interchangeable stainless steel tip.
Mobile Foam Units with Reservoir
Our mobile foam units are available in 100 liters or 150 liters. Equipped with a tank in polyethylene yellow color, mounted on chassis and two rear wheels of 400 mm, two front and rotating wheels with a locking device. The foam unit is delivered with accessories: Mixy eductor of 200 or 400 lpm and pick-up tube, a 20m long flat hose of diameter 45 or 70, a low or medium foam expansion nozzle of 200 or 400 lpm (depending on the model). Several inlet connections are possible: threaded BSP or NST-NH or standardized couplings.